Amateur radio
Allocation
10 m FM repeater outputs
29.62–29.68 MHz
60 kHz wide · High frequency
- Signal width
- 16 kHz
- Channels
- 4 × 20 kHz
- Modes
- FM
- Allocation
- Primary
- Region
- Worldwide
- Service
- Amateur
- Licence
- Amateur licence
- Power
- National
HF FM repeater output channels at 29.620-29.680 MHz with a -100 kHz input split.
An oddity: real FM repeaters on HF. Outputs are conventionally 29.620, 29.640, 29.660 and 29.680 MHz with inputs 100 kHz lower. During sporadic-E and F2 openings these repeaters are heard hundreds or thousands of kilometres away, and it is common to hear two repeaters on the same channel from different continents. A handheld with a 10 m FM converter or any modern all-mode HF radio will receive them.
Part of
- 28–29.7 MHz10 m amateur band
- 3–30 MHzNumbers stations (HF spectrum-wide)
- 3–30 MHzAutomatic Link Establishment (ALE) HF networks
- 3–30 MHzWinlink and PACTOR HF email gateways
- 3–30 MHzSTANAG 4285 and 4539 military HF modems
- 3–30 MHzSolar radio bursts (Types II, III, IV)
- 2–30 MHzIonosondes and chirpsounders
Nearby
- 27.415–27.855 MHzUpper freeband ("above channel 40")
- 28.19–28.225 MHz10 m international beacon segment
- 29–29.2 MHz10 m AM segment
- 29.3–29.51 MHz10 m amateur satellite downlink segment
- 30–50 MHzVHF low band land mobile
- 30–87.975 MHzMilitary tactical VHF-FM combat net radio (SINCGARS band)
- 30–300 MHzSolar radio bursts across VHF
- 30–300 MHzGalactic background noise at VHF