126.700 MHz - Australian / Canadian CTAF and en-route advisory
126.7 MHz
Very high frequency
- Signal width
- 25 kHz
- Modes
- AM
- Allocation
- Primary
- Region
- Australia (ACMA)
- Service
- Aeronautical mobile
- Licence
- Aviation
The default common traffic advisory frequency at Australian non-towered aerodromes.
In Australia 126.7 MHz is the CTAF used at aerodromes without a discrete frequency, and is also the general en-route broadcast frequency in Class G airspace outside radar coverage. Pilots self-announce inbound, taxiing, entering runway and departing calls. Canada uses 126.7 as the en-route Flight Information Service and mandatory frequency at many uncontrolled airports. Because it is shared over enormous areas, hearing three aerodromes at once is normal, and calls always begin and end with the aerodrome name to sort out who is talking about where.
Also at 126.7 MHz
- 118–136.975 MHzVHF airband voice channel raster, 118.000 to 136.975 MHz
- 118–137 MHzATIS - Automatic Terminal Information Service
- 117.975–137 MHzVHF civil airband (air traffic control voice)
- 117.975–137 MHz25 kHz channel spacing airband (Australia, US, most of world)AU
- 80–300 MHzMurchison Widefield Array (80-300 MHz)AU
- 30–300 MHzSporadic-E propagation (Es) across VHF
- 30–300 MHzTropospheric ducting across VHF
- 30–300 MHzSolar radio bursts across VHF
- 30–300 MHzGalactic background noise at VHF
- 30–300 MHzMeteor scatter propagation across VHF
Nearby
- 121.8 MHzAeronautical 121.800 MHz Ground
- 121.9 MHzAeronautical 121.900 MHz Ground
- 123.1 MHz123.100 MHz - civil SAR on-scene frequency
- 123.45 MHz123.450 MHz - air-to-air / 'fingers' chat channel
- 131.45 MHzAeronautical 131.450 MHz ACARS
- 131.55 MHzAeronautical 131.550 MHz ACARS
- 136.975 MHz136.975 MHz - VDL Mode 2 Common Signalling Channel
- 137.1 MHzNOAA-19 APT downlink 137.100 MHz