2 m FM repeater outputs (North America, upper segment)
146.61–147.39 MHz
780 kHz wide · Very high frequency
- Signal width
- 16 kHz
- Channels
- every 15 kHz
- Modes
- FM, DMR, D-STAR, C4FM
- Allocation
- Primary
- Region
- The Americas (ITU Region 2)
- Service
- Amateur - repeaters
- Licence
- Amateur licence (coordinated repeater)
- Power
- typically 25-100 W ERP
The main American 2 m repeater segment, 15 kHz channels with 600 kHz offsets.
North American 2 m repeaters occupy 145.10-145.50 (negative offset), 146.61-147.39 and 147.42-147.57 MHz. Below 147.00 the input is 600 kHz low; above it, 600 kHz high. Coordination is handled by regional frequency coordinators rather than the FCC. CTCSS tones control access and reduce interference from distant co-channel machines. Linking technologies - EchoLink, AllStar, IRLP, and DMR networks such as Brandmeister - mean a handheld on a local repeater can reach the other side of the world, which is either the best or worst thing about modern VHF depending on who you ask.
Part of
- 144–148 MHz2 metre amateur band (ITU Region 2 / United States)ITU2
- 30–300 MHzSporadic-E propagation (Es) across VHF
- 30–300 MHzTropospheric ducting across VHF
- 30–300 MHzSolar radio bursts across VHF
- 30–300 MHzGalactic background noise at VHF
- 30–300 MHzMeteor scatter propagation across VHF
- 30–300 MHzAurora propagation and auroral backscatter
Nearby
- 137–138 MHz137-138 MHz meteorological and LEO satellite downlink band
- 137.2–137.8 MHzOrbcomm satellite downlinks
- 144–144.035 MHz2 m EME (moonbounce) segment
- 145.8–146 MHz2 m amateur satellite sub-band
- 148–150.05 MHz148-150.05 MHz mobile-satellite uplinks
- 148–152 MHzVHF wildlife tracking collars and tags
- 148–174 MHzVHF high band land mobile
- 149.9–150.05 MHz150 MHz satellite navigation (Transit / Tsikada legacy)