Amateur 10 GHz (Australia)
10–10.5 GHz
500 MHz wide · Super high frequency
- Modes
- SSB, CW, FM, ATV, DIGITAL
- Allocation
- Secondary
- Region
- Australia (ACMA)
- Service
- Amateur
- Licence
- Advanced amateur licence
- Power
- Per licence conditions (typically 400 W pX or lower on microwave)
Australian Advanced-licence amateurs have 10.0-10.5 GHz secondary, with the satellite segment at 10.45-10.5 GHz.
The Australian Radiofrequency Spectrum Plan mirrors the ITU Region 3 table: 10-10.45 GHz is fixed, mobile and radiolocation with amateur secondary, and 10.45-10.5 GHz adds the amateur-satellite service. The WIA band plan puts narrowband activity around 10368 MHz. Australian 10 GHz activity is dominated by long-haul rain-scatter and duct paths across Bass Strait, along the NSW coast and over the Great Australian Bight, plus the annual microwave field days. Practical receive setup is a modified Ku LNB or a commercial transverter with a 144 MHz IF.
Inside this band
- 10–10.45 GHzRadiolocation 10.0-10.45 GHz
- 10.368–10.37 GHz3 cm narrowband weak-signal segment
- 10.3688–10.369 GHz3 cm amateur beacon segment
- 10.4–10.5 GHz3 cm wideband and amateur television segment
- 10.45–10.5 GHzAmateur-satellite 10.45-10.5 GHz
- 10.45–10.5 GHzAmateur 10.45-10.5 GHz (Australia)AU
- 10.4895–10.49 GHzQO-100 narrowband transponder downlink
- 10.491–10.499 GHzQO-100 wideband transponder downlink
Part of
Nearby
- 9.3–9.5 GHzRacon (radar beacon)
- 9.5–9.8 GHzSpaceborne SAR and radiolocation 9.5-9.8 GHz
- 9.7344–10.2336 GHzUWB HRP channel 14 (9984.0 MHz)
- 9.8–10 GHzRadiolocation 9.8-10.0 GHz
- 10.5–10.55 GHzX-band Doppler radar and movement detectors (10.5 GHz)
- 10.5–10.55 GHzMovement detectors 10.5-10.55 GHz (Australia LIPD)AU
- 10.55–10.6 GHzFixed service 10.55-10.6 GHz
- 10.6–10.68 GHzEESS passive 10.6-10.68 GHz (constrained sharing)