Emergency Locator Transmitter (ELT) homing signal on 121.5 MHz
- Signal width
- 8.33 kHz
- Modes
- AM, swept tone
- Allocation
- Primary
- Region
- Worldwide
- Service
- Aeronautical mobile - distress beacon
- Licence
- Beacon approval
- Power
- about 100 mW
- Importance
- ●●●●○
Crash beacons still transmit a distinctive downward-swept warble on 121.5 MHz as a homing aid for searchers.
Modern ELTs, EPIRBs and PLBs alert via 406 MHz to the Cospas-Sarsat satellites, but nearly all also transmit a low-power 121.5 MHz signal so that search aircraft and rescue teams can home in on the last few kilometres with a simple direction-finding receiver. The sound is unmistakable: a repeating siren-like tone sweeping downward two to four times a second. False alarms are extremely common - a beacon knocked in a hangar, a hard landing, or a unit thrown in a skip - and hearing one on 121.5 usually means someone is about to get a phone call. Since 2009 satellites no longer listen on 121.5, so an ELT transmitting only on that frequency will not raise an alarm at all.
Also at 121.5 MHz
- 121.5 MHz121.500 MHz - international aeronautical emergency (Guard)
- 118–136.975 MHzVHF airband voice channel raster, 118.000 to 136.975 MHz
- 118–137 MHzATIS - Automatic Terminal Information Service
- 117.975–137 MHzVHF civil airband (air traffic control voice)
- 30–300 MHzSporadic-E propagation (Es) across VHF
- 30–300 MHzTropospheric ducting across VHF
- 30–300 MHzSolar radio bursts across VHF
- 30–300 MHzGalactic background noise at VHF
- 30–300 MHzMeteor scatter propagation across VHF
- 30–300 MHzAurora propagation and auroral backscatter
Nearby
- 50.11 MHz50.110 MHz - 6 m intercontinental DX calling
- 50.313 MHz50.313 MHz FT8 (6 m)
- 57 MHzRDS / RBDS 57 kHz subcarrier (baseband, within FM channel)
- 75 MHz75 MHz aeronautical marker beacon
- 121.6 MHzAeronautical 121.600 MHz Ground
- 121.7 MHzAeronautical 121.700 MHz Ground
- 121.8 MHzAeronautical 121.800 MHz Ground
- 121.9 MHzAeronautical 121.900 MHz Ground