Land mobile & utility
Allocation
IEEE 802.15.3d 2.16 GHz base channels above 300 GHz
300–312.96 GHz
12.96 GHz wide · Tremendously high frequency
- Signal width
- 2.16 GHz
- Channels
- 6 × 2.16 GHz
- Modes
- OOK, QPSK, 16-QAM, 64-QAM
- Allocation
- Unlicensed
- Region
- Worldwide
- Service
- Wireless PAN / point-to-point
- Licence
- Depends on administration
- Confidence
- Medium
The narrowest 802.15.3d channels, 2.16 GHz wide, tiling the part of the standard's range that falls above 300 GHz.
The 2.16 GHz base channel was chosen for continuity with 60 GHz WiGig hardware and because it is roughly what a practical terahertz mixer and baseband chain could handle when the standard was written in 2017. At 64-QAM a single 2.16 GHz channel carries roughly 10 Gbit/s; the standard's headline 100 Gbit/s requires the widest channels or spatial multiplexing. The portion of the 802.15.3d range above 300 GHz overlaps the WRC-19 306-313 and 318-325 GHz identifications, so a system built here would have a regulatory home in most administrations.
Inside this band
Part of
- 275–323 GHzRadio astronomy identification 275-323 GHz (RR 5.565)
- 252–325 GHzIEEE 802.15.3d-2017 - 100 Gbit/s wireless switched point-to-point (the 300 GHz band)
- 252–325 GHzIEEE 802.15.3d terahertz wireless (252-325 GHz)
- 275–373 GHzALMA Band 7 (275-373 GHz, 0.8-1.1 mm)Llano de Chajnantor, Chile (5058 m)
- 220–325 GHzWR-3 waveguide range (220-325 GHz)
- 300–450 GHzTerahertz wireless data centre and kiosk downloading use cases
- 275–450 GHzWRC-19 Resolution 731 (Rev.WRC-19) - sharing between active and passive above 275 GHz
- 275–450 GHz6G terahertz candidate spectrum (IMT-2030 research bands)
Nearby
- 0.275–3 THzNational frequency tables above 275 GHz - what silence means in practice
- 296–300 GHz296-306 GHz passive-protected gap (lower part, 296-300 GHz)
- 296–306 GHz296-306 GHz passive-protected gap (Resolution 731 conditions apply)
- 296–306 GHzEESS/SRS passive identification 296-306 GHz (RR 5.565)
- 0.3–1 THzGyrotrons in the sub-terahertz and terahertz range
- 0.3–1 THzTerahertz non-destructive testing - coating and paint thickness measurement
- 0.3–1 THzTerahertz security screening - passive and active imaging of concealed objects
- 0.3–1.2 THzSIS mixers - quantum-limited heterodyne detection below the superconducting gap