LoRaWAN EU868 Default Channels
868–868.6 MHz
600 kHz wide · Ultra high frequency
- Signal width
- 125 kHz
- Channels
- 3 × 200 kHz
- Modes
- LoRa
- Allocation
- Unlicensed
- Region
- Europe, Africa, Middle East, Russia (ITU Region 1)
- Service
- Short Range Device
- Licence
- ERC/REC 70-03 sub-band g1
- Power
- 25 mW (14 dBm) ERP, 1% duty cycle
The three mandatory LoRaWAN join channels for Europe: 868.1, 868.3 and 868.5 MHz.
Every EU868 LoRaWAN device must support 868.100, 868.300 and 868.500 MHz at 125 kHz bandwidth - these are the join channels, and additional channels (867.1 to 867.9 MHz) are pushed to the device by the network server. Spreading factors SF7 to SF12 trade data rate for range; an SF12 uplink lasts over a second and is visible on a waterfall as a slow, unmistakable rising chirp sweep. The Things Network and Helium both use these channels. A cheap SDR plus gr-lora or a $30 single-channel gateway will receive them.
Inside this band
Part of
Nearby
- 791–821 MHzLTE Band 20 Downlink (EU 800 MHz)ITU1
- 832–862 MHzLTE Band 20 Uplink (EU 800 MHz)ITU1
- 863–865 MHzLicence-Free Wireless Microphones (863-865 MHz, Europe)ITU1
- 865.6–867.6 MHzEuropean UHF RFID (865.6-867.6 MHz)ITU1
- 868.6–868.7 MHzEuropean Alarm Sub-band (868.6-868.7 MHz)ITU1
- 869.2–869.25 MHzEuropean Social Alarms (869.2-869.25 MHz)ITU1
- 869.4–869.65 MHzEuropean 500 mW High-Power SRD Sub-band (869.4-869.65 MHz)ITU1
- 869.7–870 MHzEuropean General SRD Sub-band (869.7-870 MHz)ITU1