North American UHF RFID (902-928 MHz)
902–928 MHz
26 MHz wide · Ultra high frequency
- Signal width
- 500 kHz
- Channels
- 50 × 500 kHz
- Modes
- ASK, PR-ASK, FHSS
- Allocation
- Unlicensed
- Region
- United States (FCC)
- Service
- RFID
- Licence
- FCC Part 15.247
- Power
- 1 W conducted / 4 W EIRP
- Confidence
- Medium
- Importance
- ●●●○○
EPC Gen2 RFID readers hopping across the full 900 MHz ISM band at up to 4 watts EIRP.
North American UHF RFID uses 50 channels of 500 kHz across 902-928 MHz, frequency-hopping under Part 15.247 rules, at up to 4 W EIRP. Retail inventory systems, warehouse portals, toll tags, race timing and livestock tagging all use it. A reader is one of the loudest things in the band: a strong hopping carrier that steps every 400 ms. Passive tags backscatter at extremely low level and are usually only detectable within a metre or two. The wide hop set and high power make US RFID readers a common source of interference to 915 MHz LoRa deployments.
Inside this band
Part of
Nearby
- 824–849 MHzCellular 850 Uplink / LTE Band 5 (824-849 MHz)US
- 851–854 MHzNPSPAC Public Safety Channels (851-854 MHz)US
- 851–869 MHzUS 800 MHz SMR / Public Safety DownlinkUS
- 869–894 MHzCellular 850 Downlink / LTE Band 5 (869-894 MHz)US
- 928–929 MHzUS Multiple Address Systems / Fixed Links (928-929 MHz)US
- 929–932 MHzUS Paging Band (929-932 MHz FLEX/POCSAG)US
- 944–952 MHzUS Studio-Transmitter Links (944-952 MHz)US
- 952–960 MHzUS Fixed Point-to-Point and MAS Remotes (952-960 MHz)US