Electric fence energisers (impulse QRM)
- Modes
- Impulse
- Allocation
- Reserved
- Region
- Worldwide
- Service
- Unintentional broadband impulse radiation
The once-per-second tick that ruins LF and MF reception across rural Australia, New Zealand and anywhere with livestock.
An electric fence energiser dumps a several-kilovolt, few-joule pulse into kilometres of bare wire about once a second. The pulse is broadband and the fence is a superb long-wire antenna, so the result is a sharp click heard from VLF right through HF, often over several kilometres. On a receiver the signature is unmistakable: a regular tick at almost exactly one-second intervals, sometimes several energisers at slightly different rates producing a slow beat. Faults make it far worse - a cracked insulator, a wire touching a fence post or vegetation creates an arc that broadens the noise enormously. It is the single most common interference complaint for rural amateurs in Australia and New Zealand, and it is fixable: the culprit is usually a specific faulty insulator that can be found by walking the fence with a portable AM radio. Blankers in modern SDR software cope with it reasonably well because the pulse is short and periodic.
Inside this band
- 10–200 kHzInductive loop vehicle detectors (traffic signals)
- 10.2–13.6 kHzOMEGA global radionavigation system (historical)
- 0.02–3 MHzSolar radio bursts (type II and type III, kilometric and hectometric)
- 30–300 kHzLF band (30-300 kHz) overview
- 58 kHzAcousto-magnetic electronic article surveillance (58 kHz)
- 70–129 kHzDecca Navigator System (70-129 kHz) - closed 2000
- 79–90 kHzWireless power transfer for electric vehicles (SAE J2954, 79-90 kHz)
- 87–205 kHzQi inductive wireless charging (87-205 kHz)
- 100 kHzLORAN-C / Chayka hyperbolic radionavigation (100 kHz)
- 100 kHzeLoran (enhanced Loran) - GPS backup revival
- 119–135 kHzISM band 119-135 kHz (inductive applications, RFID, wireless power)
- 135.7–137.8 kHz2200 m amateur band (135.7-137.8 kHz)
- 190–535 kHzNon-directional beacons (NDB) - aviation and marine
- 0.19–1.75 MHzAircraft ADF / radio compass receiver coverage (190-1750 kHz)
- 234 kHzRTL 234 kHz, Beidweiler, Luxembourg (closed 2016)
- 283.5–325 kHzMarine DGPS radiobeacons (Region 1: 283.5-315 kHz; Regions 2/3: 285-325 kHz)
- 0.3–3 MHzMF band (300 kHz - 3 MHz) overview
- 415–526.5 kHzMaritime MF band 415-526.5 kHz (coast stations, NAVTEX, beacons)
- 472–479 kHz630 m amateur band (472-479 kHz)
- 490 kHzNAVTEX national language channel (490 kHz)
- 500 kHz500 kHz international maritime distress and calling (historic)
- 518 kHzNAVTEX international (518 kHz)
- 950 kHzRadio Reloj, Cuba (multiple frequencies incl. 950 kHz)
- 1–3 MHzIonosonde / chirp sounder sweeps (lower limit)
- 1.521 MHzDuba, Saudi Arabia / Zhongshan, China (1521 kHz)
- 1.6–2.1 MHzFishing-net and driftnet radio buoys (intruders around 1.6-2.1 MHz)
- 2–2.85 MHzMaritime mobile MF/HF radiotelephone (2-3 MHz)
- 2.1705–2.1945 MHzMF distress and safety guard band (2170.5-2194.5 kHz)
- 2.182 MHz2182 kHz international maritime distress and calling (voice)
- 2.1875 MHz2187.5 kHz GMDSS Digital Selective Calling (MF)
- 2.3–2.495 MHz120 m tropical broadcast band (2300-2495 kHz)
- 2.495–2.505 MHz2.5 MHz standard frequency and time signal band
- 2.5 MHz2500 kHz standard frequency and time signal (WWV, WWVH, BPM, others)
- 2.85–3 MHzAeronautical mobile (route) HF, lower segment (2850-3025 kHz)
Nearby
- 1–100 kHzClaimed seismo-electromagnetic earthquake precursors (VLF/ULF)
- 3–30 kHzVLF band (3-30 kHz) overview
- 3–100 kHzMetal detectors and inductive sensing (VLF/LF)
- 3–500 kHzPower line communication (PLC) - smart meters, broadband over powerline
- 2–30 MHzIonosondes and chirpsounders
- 2.85–3.025 MHzAeronautical mobile (route) band, 3 MHz
- 2.941–21.997 MHzHF Data Link (HFDL) network
- 3–18 MHzV02a "Atencion" Cuban numbers station