VLF band (3-30 kHz) overview
- Modes
- MSK, FSK, CW
- Allocation
- Primary
- Region
- Worldwide
- Service
- ITU Very Low Frequency band
The 3-30 kHz band: enormous wavelengths, very stable Earth-ionosphere waveguide propagation, used for submarine broadcast, navigation and time.
A 20 kHz wave is 15 km long, so no antenna is remotely resonant - VLF stations use multi-kilometre umbrella or valley-span wires, huge loading coils, and accept efficiencies of a few percent while burning hundreds of kilowatts to a megawatt. In return the signal follows the Earth-ionosphere waveguide with attenuation of only 2-3 dB per 1000 km, is stable in phase to microseconds, and penetrates tens of metres of seawater. Occupants are naval one-way broadcasts to submarines, the former Omega and current Alpha/RSDN-20 navigation systems, standard-frequency stations, and (below 9 kHz in most countries) an unallocated free-for-all where amateurs run 'dreamers band' experiments. VLF amplitude and phase are also a standard remote-sensing tool for the D-region: solar flares cause sudden ionospheric disturbances (SIDs) that step the received phase within seconds, which school and amateur SID monitors record daily.
Inside this band
Part of
Nearby
- 0.1–3 kHzMains harmonic comb and power-line noise
- 0.2–5 kHzChorus, hiss and other magnetospheric emissions
- 0.3–3 kHzThrough-the-earth (TTE) mine communications, ULF/VLF band
- 1–10 kHzWhistlers
- 10–200 kHzInductive loop vehicle detectors (traffic signals)
- 0.01–3 MHzElectric fence energisers (impulse QRM)
- 0.02–3 MHzSolar radio bursts (type II and type III, kilometric and hectometric)
- 30–300 kHzLF band (30-300 kHz) overview